If you serve the Oil & Gas industry, then you’re likely familiar with NFPA® 2112. It’s the industry consensus standard that lays out the requirements for FR garments to enter the market, including the capabilities and characteristics of the fabrics, the construction of the garment and more. Read our fact sheet to learn more about the changes to this important document’s 2018 revision.
NFPA® 2112 is the well-known and often quoted safety standard to those who work in the Oil & Gas Industry — no matter where they fall in the stream. And while 2112 is an important standard on how to specify the minimum performance requirements and test methods for flame-resistant fabrics and components, it does not provide any guidance for the selection, use, care, and maintenance of FR clothing. NFPA® 2113 is your go-to safety standard in regard to building your FR clothing program.
NFPA® 2113 walks safety professionals through their hazard assessment, explains how to specify clothing based on the requirements of NFPA® 2112. NFPA 2113 is where you will find proper care and maintenance addressed. NFPA® 2112 lays out the minimum performance requirements and test methods that FR garments must meet in order to enter the market, while NFPA® 2113 focuses on minimizing the health and safety risks by choosing the correct garment based on the proper selection criteria and how to properly wear FR garments in the field.
In addition to proper care and maintenance, NFPA 2113 stipulates the training guidelines that help ensure your program is in compliance with OSHA 1910.132, the often cited regulation when FR clothing programs fail to meet OSHA requirements.
Even though NFPA 2112 may get all the headlines and recognition as a safety professional NFPA 2113 is your go-to standard.
Get in touch with a Bulwark representative.
In 2015, ANSI/ISEA 107 underwent an extensive overhaul. The new version merges ANSI/ISEA 107-2010 and ANSI/ISEA 207-2011 into a single document that considers all occupations faced with low-visibility hazards, including public safety workers. The changes outlined in the 2015 revision will impact wearers of high-visibility safety apparel (HSVA) across a wide range of industries including construction, oil and gas, and law enforcement, among others. Download the whitepaper to learn how the changes to ANSI/ISEA 107 affect your safety program.
Fill Out the Form Below to Download Our Whitepaper.
For 50 plus, proud, industry-leading years. And counting.
That’s how deep our commitment to oil & gas runs at Bulwark FR.
We were born in the oil fields.
We think about the people who give their all and sacrifice their everything to work in them, every day.
That’s why we design our every flame-resistant product with their personal protection and performance in mind.
That’s why we trace every stitch of every garment we make across 60 manufacturing touch points. Fiber to factory.
That’s why we devote more time to training and educating safety managers, and the men and women under their watch, than any other FR brand.
Above all, that’s why each and every one of our employees so solemnly pledge to be the relentless protectors of those that power the world. From the electric utility workers who keep our homes, hospitals, ventilators, lights and laptops on during these unprecedented times – to the roughnecks, roustabouts, drillers and derrickmen who keep the wheels of progress moving while the world seems to have all those in our proud industry over a barrel.
Put another way, we are oil & gas – at heart & soul.
And we dedicate our lives to protecting yours.
With every fiber of our being.
AR, FR, ATPV, OSHA. The list goes on and on. If there’s one thing that’s true about FR safety, it’s that there are a lot of terms to memorize. It’s not always easy to keep the various words and acronyms straight, but when it comes to building and implementing an effective safety program, knowing your FR vocabulary is important. Here, our FR experts have compiled the most important of those terms in a handy alphabetized glossary so you can create a culture of compliance.
An arc flash is a type of electrical explosion where temperatures can reach or exceed 35,000 °F. The Arc Flash hazard affects all who work in and around energized electrical equipment. This can include general industry electricians, maintenance workers and operators, as well as our electric utilities, including transmission, distribution, generation and metering.
Arc-Rated (AR) Protective Clothing
Arc-rated protective clothing protects from arc flash and electric arc hazards. AR garments are measured in cal/cm². The total AR clothing system must meet or exceed required arc protection levels. Remember, all AR is FR, but not all FR is AR.
Breakopen is the formation of holes in the fabric during arc rating testing. This is the point of failure of FR protective garments.
Energy Break-Open Threshold is an alternative measure to ATPV when that measure cannot be used due to breakopen.
A rapid moving flame front that can be caused by a diffuse fuel, such as dust, gas, or the vapors of an ignitable liquid, without the production of damaging pressure. Flash fire is the primary hazard in the Oil & Gas industry, which includes exploration, drilling, field services and refining.
Hazard Risk Assessment
The first step in the creation of any PPE program is the Hazard Assessment. Federal regulations require employers to assess the workplace to determine if hazards that require the use of personal protective equipment are present or are likely to be present. These include impacts, combustible dust, fire/heat, and chemical hazards, among others.
HRC (Hazard Risk Category)
Hazard risk categories are defined by NFPA® 70E and assigned based on risk associated with electrical safety and arc flash. HRC levels determine the appropriate ATPV of flame-resistant clothing for a given task.
Replaces HRC in 2015 edition of NFPA 70E, the “0” category was eliminated in NFPA 70E 2015. The minimum ATPV’s for PPE Category 1 through 4 are the same as they were for HRC, and the new PPE table only specifies PPE for work within the arc flash boundary.
HRC 2 rated garments have an arc rating between 8 cal/cm² and 25 cal/cm² and are often referred to as “daily wear.”
HRC 3 rated garments have an arc rating between 25 cal/cm² and 40 cal/cm².
HRC 4 rated garments have an arc rating equal or greater than 40 cal/cm². These high ratings are achieved with a layered FR system. Download our FR Layering Fact Sheet to learn the do’s and don’ts of layering for FR.
Inherently Flame Resistant
Inherently flame resistant fabrics are engineered to be flame-resistant at the fiber level, and do not require any additional finishing.
The National Fire Protection Association is an agency whose task it is to promote and improve fire protection and prevention. They publish National Fire Codes.
Refers to NFPA’s “Standard on Flame Resistant Garments for Protection of Industrial Personnel Against Flash Fire.” NFPA® 2112 is the “go-to” industry consensus standard that addresses flash fire. It defines the testing methods and performance requirements for flame-resistant fabrics for this hazard.
The “Standard for Electrical Safety in the Workplace,” NFPA® 70E is meant to protect those working around potential arc flash hazards. Note that NFPA® 70E applies only to general industry electrical safety, not to electric utility workers.
Founded by the Occupational Safety & Health Act of 1970, The Occupational Safety and Health Administration’s (OSHA) mission is to “assure safe and healthful working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education and assistance.” Their general duty clause ensures a safe workplace for all employees and is the basis for all industry consensus standards. OSHA determines regulations and standards related to personal protective equipment.
The regulation states that power utilities make reasonable estimates of the incident heat energy to which their employee would be exposed, and that employees exposed to hazards from electric arcs wear AR clothing and other protective equipment with an arc rating greater than or equal to the estimated heat energy.
Founded in 1918, The American National Standards Institute coordinates and develops voluntary standards for products, services, and systems. The organization’s goals include performance consistency and product safety. It is the U.S. member body to ISO and IEC.
PPE (Personal Protective Equipment)
Personal protective equipment is specialized safety gear worn by an employee for protection against a hazard. Flame resistant/arc rated garments are a form of personal protective clothing worn against thermal hazards.
Moisture wicking fabrics pull moisture (sweat) away from the body and dry quickly, keeping the wearer cooler, dryer, and more comfortable. Bulwark iQ Series® FR Comfort Knits and Wovens are among the best moisture wicking FR garments available.
Breathability refers to how well a fabric allows air to be transmitted through the material. The more air that passes through, the cooler the wearer stays. Bulwark iQ Series® Endurance Collection is the first of its kind to offer high level FR protection in a material that is extremely breathable and durable.
Our free FR Home Wash magnet is packed with FR laundering quick tips. Request your free magnet to learn more, and keep it handy wherever you launder your garments.
Fill Out the Form Below to Request Your Magnet
The Ventura County Fire Department recently developed a set of basic wildfire preparedness guidelines for the oil and gas industry. Many oil and gas properties border natural areas, have access challenges and assets that are difficult to protect from an advancing wildfire. Their guidelines are titled Ready, Set, Go.
The program is simple:
Ready is before the fire occurs.
The ready checklist includes:
• Create a wildfire action plan for each site
• Know your evacuation routes and make sure all important turns are clearly marked
• Assemble emergency supply kit for all facilities, buildings and vehicles
• Make sure property address is clearly marked
• Establish and maintain brush clearance around structures, wells, storage tanks, compressors, traps and other infrastructure
• Properly mark all storage areas used for chemicals, hazardous materials or explosives
• Clearly mark water tanks, hydrants, ponds or other water supplies that could be used for firefighting
• Place directional signs identifying critical locations and at key intersections
Set is as the fire approaches
The set checklist includes:
• Locate and review evacuation plans and emergency procedures
• Notify appropriate company contacts
• Load vehicles with emergency supplies, valuables and essential documents or equipment. Park vehicles facing out, or facing downhill, and be ready to evacuate if ordered
• Reschedule or cease all “hot works”
• Account for all personnel on the property, including employees, contractors, vendors and visitors
• Move equipment and vehicles to safe zones
• Close all doors and windows and turn on lights
• Monitor property for embers and small fires started by embers
• Monitor radio, television or internet for fire and weather updates
• Stay hydrated
• Keep all employees and other personnel on the site informed of changing conditions
Go is evacuation – leave early
• Evacuate non-essential employees as early as possible. Evacuate all workers if conditions warrant. Do not wait to see how the fire behaves. Remember: If the facility has been properly prepared, the best thing to do is evacuate and let the firefighters do their job. Severe fire conditions and behavior could prevent firefighters from rescuing those that don’t evacuate.
If you are trapped by fire or unable to evacuate:
• Boots, gloves, hats, googles and bandanas are good protection against smoke and embers
• Stay hydrated
• Patrol building and property for spots fires caused by embers
• As the main body of fire approaches, take refuge inside a structure, away from outside walls
• Bring hoses inside to protect them from ember damage
• Do not go outside until the fire has passed. It will be very hot and uncomfortable inside, but it will be much worse outside
• If possible, alert other employees to your location and stay in contact
• After the fire has passed, check roofs and patrol the property to extinguish small fires
• Call 911 if the fires are too large or there are too many for you to handle
The bottom line is wild fires can be extremely intense and their behavior can be very erratic, so being prepared with a plan like that developed by the VCFD is a good idea.
Cold stress may not be as well-known as heat stress, but when the temperature drops, it can pose a significant danger. Employers have many options for helping workers manage their exposure to cold while protecting them from flash fire and arc flash. This whitepaper discusses how you can layer FR/AR garments, how to implement a PPE program and the warnings signs of cold stress.
Fill out the form below to download the whitepaper.
Depending on the line of work you’re in, there are any number of dangers you may encounter on the job. From slip-and-fall hazards to those due to working at height, there’s PPE to help keep you protected. When it comes to thermal hazards, your FR clothing protects you against two main hazards: Flash Fire and Arc Flash.
A flash fire is a rapid moving flame front that can be caused by a diffuse fuel, such as dust, gas, or the vapors of an ignitable liquid, without the production of damaging pressure. In the Oil & Gas industry, which includes exploration, drilling, field services and refining, flash fires are the primary hazard FR protects against.
NFPA® 2112 and NFPA® 2113 are the “go-to” industry consensus standards that address flash fire. Once safety managers have identified they have a flash fire hazard, FR is necessary. Selecting the appropriate FR garments for your safety program should be based on a number of factors such as protection, comfort and durability.
An arc flash is a powerful and dangerous occurrence where an electric current leaves its anticipated path and travels from phase to phase, or phase to ground. The resulting explosion produces extremely high temperatures, acoustic energy and concussive force. When a person is in close proximity to the arc flash, serious burn injury and even death can occur.
The Arc Flash hazard affects all who work in and around energized electrical equipment. This can include general industry electricians, maintenance workers and operators, as well as our electric utilities, including transmission, distribution, generation and metering. As employers, it is your responsibility to ensure that all employees exposed to the hazard are protected with arc-rated flame-resistant clothing.
No matter which hazard your FR clothing is designed to address, the success of any program is dependent upon the proper selection, use, care and maintenance of your FR program. For more information on how to select the right FR for your needs and tips on implementing a FR clothing program, get in touch with a Bulwark FR expert.
Lab coats have been used for decades, but they have typically been made from cotton or polyester/cotton blends with the primary purpose being to keep foreign materials off of the clothing worn under the coat. Flame-resistant (FR) lab coats have also been available for years, but they have not been widely used. However, the use of FR lab coats in university labs has become increasingly important due to a number of recent accidents related to fire and clothing ignition. Having PPE that combines durable FR protection with inadvertent chemical-splash protection (CP), makes it ideal for many laboratories. This technical brief outlines the importance of FR clothing in laboratories. Read on the learn more.
Fill out the form below to download the technical brief.
GARMENTS ADDRESS FLASH FIRE, ARC FLASH, CHEMICAL SPLASH & POOR VISIBILITY
Multitasking is everywhere. Not just in the way we live our lives, but also in the products we use every day. Our cellphones now access the internet and double as calculators, GPS systems, cameras and more. Our watches don’t just tell time, but also count our steps, monitor our heart rates and alert us when we have new text messages. So why shouldn’t our protective apparel serve more than one purpose as well?
According to Frost and Sullivan’s North American Industrial Protective Clothing Market Forecast to 2020, apparel with multiple protective functionalities is becoming increasingly popular. This isn’t surprising, considering that many occupations involve more than one hazard — and most people would rather not wear extra layers of protective apparel or change clothes several times throughout the day to address each hazard they might encounter.
DEFINING THE NEED
Protective clothing is only effective if it is worn consistently and correctly. The best way to encourage proper use is to make the protective apparel as comfortable and easy to wear as possible. By reducing the number of different garments and/or layers necessary for proper protection, you can help increase the likelihood that protective workwear won’t be worn improperly, or worse, forgotten or forgone entirely.
In this way, multi-hazard protective apparel is a major step in improving safety. It provides a much more convenient and practical way to address protection against common workplace hazards, helping inspire increased wearer compliance.
Due to the significant advantages multi-hazard protective clothing offers, a variety of garments have been developed to address some of the most common hazard combinations in today’s work environments.
FLASH FIRE AND ARC FLASH
While a variety of industries face both flash fire and arc flash, employees working in utilities or oil and gas may be particularly likely to need protection against these two hazards. As a result, there is a need for multi-hazard protective apparel that meets the unique demands of those industries.
To address this need, flame-resistant (FR) clothing manufacturers have begun developing garments that meet the requirements of both NFPA 2112, the Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire, and NFPA 70E, the Standard for Electrical Safety in the Workplace. Various multi-hazard protection options are even available to meet the specific requirements for each of the NFPA 70E personal protective equipment (PPE) categories. As an added bonus, some of these multi-hazard garments provide protection against small molten metal splatter as well.
CHEMICAL SPLASH AND THERMAL HAZARDS
In many environments where thermal hazards such as arc flash or flash fire are present, there is also a risk of chemical splash. This combination of hazards may be a concern for those working in laboratories, food processing, machinery and transportation, agriculture, or anywhere else flammable substances or liquid chemicals are present.
Fortunately, recent clothing innovations combining chemical-splash protective technology with FR fabric have made simultaneous protection against these hazards significantly more comfortable and convenient. You can now purchase lab coats that offer lightweight, breathable protection against both thermal hazards and inadvertent chemical splash — and other products aren’t far away.
POOR VISIBILITY AND THERMAL HAZARDS
It is not uncommon to find thermal hazards in work environments where there is also poor visibility, resulting in a need for both FR and high-visibility protection. Even if it is worn over FR clothing, non-FR high-visibility clothing can ignite, continue to burn and even melt when exposed to heat and flame, endangering the wearer. But choosing to forego high-visibility clothing can be just as dangerous.
To solve this problem, FR clothing manufacturers developed high-visibility FR clothing that meets the requirements of the ANSI/ISEA 107-2015 Standard for High-Visibility Safety Apparel and Accessories as well as NFPA 70E and NFPA 2112. Now available in a variety of styles of vests, T-shirts and beyond, high-visibility FR clothing is a safety game-changer for workers in industries ranging from electrical utilities to oil and gas.
A FINAL NOTE
While multi-hazard protection can be the perfect solution in many work environments, it is not right for everyone. When selecting workwear, safety should always be the top priority. To evaluate the best protective clothing options for your workplace, begin by thoroughly assessing all potential hazards and consulting the applicable safety standards. From there, other factors such as comfort, long-term cost-effectiveness and style preferences should be taken into account.
If multi-hazard protection sounds like the right choice for you, remember that it is not all garments are created equal. In addition to providing combined protection against relevant hazards, the multi-hazard protection products you choose should be able to meet the demands of your work environment. For the best on-the-job performance and longest wear life, look for garments that are built for durability and made from high-quality, low-shrinkage fabrics. When it comes to comfort, you’ll want to find products that support ease of movement, fit properly, offer good breathability and help manage moisture. Since many of these factors are subjective, you may wish to work with a manufacturer that offers wear trials so you can test out your options before making a purchase.
Multi-hazard protection is already making a significant difference in safety, and these innovations are only the beginning. As work environments continue to evolve and the workwear industry shapes itself in response, new and better ways of protecting workers will continue to unfold.
Building a PPE program that meets all safety requirements and meets your personal needs is no easy task. You must select the right garments based on the unique hazards of your industry, in addition to important factors like comfort, durability and laundering. But even the best PPE program in the world is ineffective without the proper implementation and training. Below, we’ll provide you with a step-by-step process for designing, implementing and maintaining your PPE program.
The first step in the creation of any PPE program is the Hazard Assessment. Federal regulations require employers to assess the workplace to determine if hazards that require the use of personal protective equipment are present or are likely to be present. Using the Hazard Assessment Checklist, you will conduct a walk-through survey of the workplace to identify potential hazards. These include impacts, combustible dust, fire/heat, and chemical hazards, among others. When conducting your assessment, be sure to consider workplace, procedural, and environmental hazards.
Selecting the Right PPE
Once you’ve established the need for PPE, it’s time to determine the degree of protection required based on your particular hazards. We do this by matching the hazard to the regulations, which inform what, if any, PPE is required. Industry consensus standards may be used to guide selection decisions, and the best way to cite these standards is by industry. For the main industries Bulwark serves, the hazards and standards are as follows:
Oil & Gas, which includes exploration, drilling, field services, refinement, and chemical, faces the known hazard of flash fire, a rapidly moving flame front that expands through diffuse fuel without creating blast pressure.
NFPA® 2112 and NFPA® 2113 are the “go-to” industry consensus standards that address flash fire. NFPA® 2113 focuses on how organizations and employers—as well as individual wearers—should choose the correct garment based on certain criteria.
Electric Utility workers, including those working in the transmission, distribution, generation, and metering of power utilities, are exposed to hazards associated with electrical energy, primarily electrical arcs or arc flashes.
General Industry: Wherever workers may be exposed to hazards associated with electrical energy, employers must make sure they are protected. This includes electricians, maintenance workers, and operators.
NFPA 70E® requires AR (or arc-rated) clothing for any potential exposure above 1.2 cal/cm2, which equals the onset of a second-degree burn. The level of protection must be based on the task at hand, and most general industry tasks will require CAT2 or higher. It’s necessary to carefully consider the actual risk associated with a job and to match the protection category accordingly.
NOTE: NFPA 70E® applies only to general industry electrical safety. To address specific circumstances for utility, OSHA published 1910.269 & 1926.960, which state that power utilities are required to wear arc-rated clothing which matches the potential threat as determined by a proper hazard analysis.
Employers implementing a PPE program are required by OSHA 1910.132(f)(1) and all industry consensus standards to provide training to each employee. According to OSHA, each employee who is required to wear PPE should at least know when it is necessary, what exactly is necessary, the do’s and don’ts of proper wear, what its limitations are, and how to properly care for it.
NFPA® 2112 A.5.1.1 offers specific requirements about the information employers must provide to their employees.
Proper care and maintenance of FR/AR clothing is essential to the effectiveness of your PPE program. While most industry standards recommend following the instructions provided by compliant garment manufacturers, some standards offer specific guidance, and there are a few basic rules that apply across all relevant standards.
1. Do not use any kind of bleach or peroxide
2. Do not use any additive that could build up and impede FR performance
3. Wash FR/AR garments separately
4. Turn FR/AR garments inside out to help color retention and preserve appearance
5. Use liquid detergent for best results
6. Avoid the hottest temperature to reduce the impact of shrinkage
7. For tough stains, apply liquid detergent or stain remover and soak garment
8. For even tougher stains, Bulwark® FR garments can be dry cleaned
9. Tumble dry on low setting and do not over dry
10. Rewash garments with lingering odor
11. Never use DEET or any other flammable substances on FR/AR clothing.
12. Any repairs must be made with fabric and findings that match the protection level of the original garment.
More specific regulations about PPE maintenance are defined in NFPA® 2113 and NFPA 70E®.