iQ Series® Men's Mobility Coverall with Insect Shield
Coveralls
iQ Series® Men's Mobility Coverall with Insect Shield
- Select Styles for Availability
- Mobility sleeve pleat
- Improved fit in lower torso
- Lightweight fabric with CAT2 protection
- Two-way, concealed Nomex® tape, brass, break-away zipper
- Concealed snap at top of zipper and at neck
- Lay-flat collar
- Snap closure on cuff
- Full elastic waist back
- Two front swing pockets, two patch chest pockets with flaps and concealed snap closure, two patch hip pockets, left sleeve pocket, one patch pocket on leg
- Side vent openings with snap closure
- This flame-resistant garment meets the requirements of NFPA 2112, Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2018 Edition
- Lots available: QC20DI
- Mobility sleeve pleat
- Improved fit in lower torso
- Lightweight fabric with CAT2 protection
- Two-way, concealed Nomex® tape, brass, break-away zipper
- Concealed snap at top of zipper and at neck
- Lay-flat collar
- Snap closure on cuff
- Full elastic waist back
- Two front swing pockets, two patch chest pockets with flaps and concealed snap closure, two patch hip pockets, left sleeve pocket, one patch pocket on leg
- Side vent openings with snap closure
- This flame-resistant garment meets the requirements of NFPA 2112, Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2018 Edition
- Lots available: QC20DI
iQ Series® Men's Mobility Coverall with Insect Shield
-
Category 2 Protection
Arc-rated FR long-sleeve shirt and FR pants or FR coverall with required minimum Arc Rating of 8 cal/cm².
-
NFPA® 2112 Compliant
Bulwark® Protective Apparel offers flame-resistant protective garments that are certified by Underwriters Laboratories to meet the requirements of NFPA® 2112 Standard on Flame Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2023 Edition. NFPA® 2113 Standard on Selection, Care, Use and Maintenance of Flame Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2020 Edition, requires that garments cover the upper and lower body and flammable underlayers as completely as possible. Bulwark® garments meet this requirement either as a single garment such as a coverall or when worn with another certified garment such as a shirt or pants to provide both upper and lower body coverage.
- Fabric
-
Body: 5.5 oz. (185 g/m²) iQ Series® Mobility Flame Resistant, Insect Repellant Twill
- Blend
-
Body: 50% Aramid / 25% Lyocell / 25% Modacrylic
- Care
-
- Finish
- Breathable
- Closure
- Side vent openings with snap closure
- One patch pocket on leg
- Country Origin
- Imported of Fabric Made in USA