Safety Considerations Bulwark Disposable coveralls are not designed as a primary source of thermal protection and must be worn over suitable flame-resistant apparel. The disposable coverall fabric will burn in the presence of an ignition source, but will self-extinguish when the ignition source is removed. Important Note: Primary FR garments when worn properly, can serve to minimize the extent of burn injury; no garment can eliminate or prevent all risk of burn injury.

When worn properly, Bulwark Disposable FR coveralls can extend the life of more expensive thermal protective garments by preventing flammable contaminants from soiling the fabric. They offer about 80% filtration efficiency against particles in the 2-5 micron range. Neither is suitable for asbestos removal.

Limitations of Use

NOT intended to be worn for fire entry, structural or wildlands firefighting activities.

Does Not provide personal protection from chemical exposures or molten metal splash.

NOT recommended for use in critical static control operations. To prevent generation of potentially hazardous static electricity, do NOT don or remove in a hazardous area.

Limitations of Use

NOT intended to be worn for fire entry, structural or wildlands firefighting activities.

Provides limited personal protection from small incidental chemical splash. Chemical penetration testing of the KDE4 has been conducted in accordance with ASTM F1001, liquid challenges only, using ASTM F903, Procedure C.

Does Not provide personal protection from molten metal splash.

NOT recommended for use in critical static control operations. To prevent generation of potentially hazardous static electricity, do NOT don or remove in a hazardous area.

Marking Recommendations & Restrictions Additional labeling, emblems, trim or heraldry should not be added to these garments. Clothing may be marked with an individual’s name, department, etc. using an indelible laundry marker.

Warranty Information The warranty of Bulwark Protective Flame Resistant Apparel is stated in our conditions of sale. We will ship the goods ordered, and they will be free of fabric or manufacturing defects. Bulwark will repair or replace any garment that has a manufacturing defect. No other warranty is made, either expressed or implied, including no guarantee of fitness for a particular use or purpose.

Sizing/Adjustment Selection of sizing of clothing should maximize the function of the wearer without impeding movement. Alterations to the garment are not permitted as they could reduce the protective qualities of the clothing.

Recommended Storage Practices Garments should be stored in a cool, dry environment and out of direct contact with light.

Inspection Frequency & Details It is the wearer’s responsibility to inspect the garment before wearing for rips, tears, holes, thin spots, broken/missing closures, and heavy soiling. Remove garment from service if a rip, tear or hole is larger than 1”.

Donning & Doffing Procedures This and all flame resistant garments are worn properly only when sleeves are rolled down with cuffs closed, front closures are fully engaged and shirt tail tucked in. Do NOT don or remove in a hazardous area.

Precautions It is essential to keep flame resistant clothing free from residual soils, especially those that are petroleum based, as they can mask the flame resistance of the fabric and become fuel for an ignition source. If a FR disposable garment becomes heavily soiled or if contaminants emit an odor indicative of petroleum-based substances, it should be removed from service for replacement and disposed of. This garment should be disposed of after wearing.

Maintenance Criteria If this garment should become damaged, it should be disposed of and not repaired. Alterations to the garment are NOT permitted as they could reduce the protective qualities of the clothing.

The user assumes all risks associated with the use of this product.
Failure to comply may result in serious INJURY or DEATH.